Latest News

October Release Countdown Teasers Day 5: New Products

01 October, 2020 2 comments Leave a comment

We are very excited to show you all of the new products that will be available in our store, and also at Simon Says Stamp tonight at 8pm (BST) UK time. 

We regret to inform you that there will be no coordinating dies for this months release, we have decided to put a hold on them for a while but will keep you updated should this change.  Sincere apologies for any disappointment or frustration this may cause.

October New Product Release 

 

New Products

    The fabulous Design Team (including a special guest appearance by the wonderful Keeway - yay!) all have one last teaser to share with you today:

    We are extremely grateful that our friend Michelle has produced a product reveal video for this month's release, please watch if you can.  A gigantic thank you to Keeway, Francine and Caly for guest designing this month, they really have been amazing.  Our Design Team have been incredible once again, we are extremely lucky to be supported by such a talented group of ladies.

    For a chance to win all of this month's new stamp sets, please head on over to our facebook page and leave a comment on today's post.

    Please continue to look after yourselves, this year has been challenging for all of us, please know that being able to connect with you on all our social media platforms has been a huge source of comfort for us and we can't thank you enough.

     

    October Release Countdown Teasers Day 4: Naughty or Mice and Present A Plushie

    30 September, 2020 4 comments Leave a comment

    Welcome back to day 4 of the October Release Countdown Teasers.

    Today we're introducing three stamp sets called Naughty or Mice, Seasonal Scenes and Present A Plushie.

      We Wish You A Merry Christmas

      Instructions

      • A6 white card base (4" x 5.5" approx.) portrait
      • Stamp fireplace scene in black ink on to 10 cm x 14 cm white card and mask
      • Die cut large square aperture from mylar sheet to create reusable stencil
      • Position custom made stencil centrally on top of stamped image and secure in place with washi tape
      • Ink blend background using mini ink blending tool with yellow and orange inks
      • Remove stencil and mask, colour image with markers and add white highlight detail with gel pen
      • Adhere to card base using foam sheet cut to size and adhesive roller
      • Stamp mice and accessories in black ink on to separate white card, colour with markers and add white highlight detail with gel pen
      • Cut out mice and accessories with scissors and adhere to card using foam pads
      • Stamp sentiment in black ink

       

      Santa Is It Too Late To Be Good?

      Instructions

      • A6 white card base (4" x 5.5" approx.) portrait
      • Ink blend square grid background on to 10 cm x 14 cm white card using stencil and mini ink blending tool with pale blue ink
      • Adhere to card base using foam sheet cut to size and adhesive roller
      • Stamp mice in black ink on to separate white card, colour with markers and add white highlight detail with gel pen
      • Cut out mice with scissors and adhere to card using foam pads
      • Stamp sentiment in black ink

         

        All I Want For Christmas This Year Is You

        Instructions

        • A6 white card base (4" x 5.5" approx.) landscape
        • Die cut large rectangle aperture from mylar sheet to create reusable stencil
        • Position custom made stencil centrally on top of 10 cm x 14 cm white card, landscape orientation, and secure in place with washi tape
        • Ink blend background using mini ink blending tool with two shades of blue ink
        • Allow to dry thoroughly before stamping birch trees on top with watermark ink, remove stencil, sprinkle over white embossing powder and set with heat tool
        • Adhere to card base using foam sheet cut to size and adhesive roller
        • Die cut snowdrifts from white card and adhere to card using foam pads
        • Stamp gift boxed characters in black ink on to separate white card, colour with markers and add white highlight detail with gel pen
        • Cut out gift boxed characters with scissors and adhere to card using foam pads
        • Stamp speech bubble and sentiment in black ink on to separate white card, cut out with scissors and adhere to card with foam pads
        • Stamp sentiment in black ink

         

        Santa Is It Too Late To Be Good?

        Instructions

        • A6 white card base (4" x 5.5" approx.) landscape
        • Ink blend scalloped rectangle background on to 10 cm x 14 cm white card, landscape orientation, using stencil and mini ink blending tool with pale turquoise ink
        • Remove stencil and adhere to card base using foam sheet cut to size and adhesive roller
        • Stamp gift boxed characters and tree in black ink on to separate white card, colour with markers and add white highlight detail with gel pen
        • Cut out gift boxed characters and tree with scissors and adhere to card using foam pads
        • Stamp sentiment in black ink

        Please check in on our fantastic Design Team for more countdown teasers:

        Thank you very much for joining us today.

         

        Clearly Besotted Supplies

        Other Supplies

        • Neenah Solar White 110lb card stock
        • Spellbinders Nestabilities square dies
        • Spellbinders Nestabilities rectangle dies
        • My Favourite Things Snowdrift dies
        • Memento Tuxedo Black ink pad
        • VersaFine Onyx Black ink pad
        • VersaMark ink pad
        • Versacolor Ink pads
        • Copic Sketch markers
        • Uni-ball Signo white gel pen
        • White embossing powder
        • Mylar sheet 190 micron
        • Inkadinkado stamping mask paper
        • Ranger mini ink blending tool
        • Heat tool
        • MISTI stamping platform

         

        October Release Countdown Teasers Day 3: Dachshund Through and Eat Snooze & Be Merry

        29 September, 2020 5 comments Leave a comment

        Welcome back to day 3 of the October Release Countdown Teasers.

        Today we're introducing two stamp sets called Dachshund Through and Eat Snooze & Be Merry.

          Santa Paws Is Coming To Town

          Instructions

          • A6 white card base (4" x 5.5" approx.) landscape
          • Die cut large rectangle aperture from mylar sheet to create reusable stencil
          • Position custom made stencil centrally on top of 10 cm x 14 cm white card, landscape orientation, and secure in place with washi tape
          • Ink blend background using mini ink blending tool with cerise and blue inks, then add starry sky detail using white ink spray
          • Allow to dry thoroughly before stamping tree backdrop on top with watermark ink, remove stencil, sprinkle over white embossing powder and set with heat tool
          • Stamp sentiment with watermark ink, sprinkle over white embossing powder and set with heat tool
          • Adhere to card base using foam sheet cut to size and adhesive roller
          • Stamp dachshunds and lampposts in black ink on to separate white card, colour with markers and add white highlight detail with gel pen
          • Cut out dachshunds and lampposts with scissors and adhere to card using foam pads

           

          Dachshund Through The Snow

          Instructions

          • A6 white card base (4" x 5.5" approx.) portrait
          • Die cut large circle aperture from mylar sheet to create reusable stencil
          • Position custom made stencil centrally on top of 10 cm x 14 cm white card and secure in place with washi tape
          • Mask across the bottom of the circle stencil using washi tape
          • Ink blend background using mini ink blending tool with two shades of blue ink, add snow effect using stencil and mini ink blending tool with white pigment ink
          • Remove stencil and adhere to card base using foam sheet cut to size and adhesive roller
          • Stamp houses and dachshund in black ink on to separate white card, colour with markers and add white highlight detail with gel pen
          • Cut out houses and dachshund with scissors and adhere to card using foam pads
          • Stamp sentiment in black ink

             

            Have Your Sloth A Merry Little Christmas

            Instructions

            • A6 white card base (4" x 5.5" approx.) landscape
            • Ink blend panel background on to 10 cm x 14 cm white card, landscape orientation, using stencil and mini ink blending tool with green and red inks
            • Adhere to card base using foam sheet cut to size and adhesive roller
            • Stamp sentiment with watermark ink, sprinkle over white embossing powder and set with heat tool
            • Stamp sloths in black ink on to separate white card, colour with markers and add white highlight detail with gel pen
            • Cut out sloths with scissors and adhere to card using foam pads

             

            It's Beginning To Look A Sloth Like Christmas

            Instructions

            • A6 white card base (4" x 5.5" approx.) portrait
            • Die cut large rectangle aperture from mylar sheet to create reusable stencil
            • Position custom made stencil centrally on top of 10 cm x 14 cm white card and secure in place with washi tape
            • Stamp birch trees in black ink and mask, then ink blend background using mini ink blending tool with blue and purple inks
            • Remove masks and stencil and adhere to card base using foam sheet cut to size and adhesive roller
            • Die cut snowdrift from white card and adhere to card using foam pads
            • Stamp sloth in black ink on to separate white card, colour with markers and add white highlight detail with gel pen
            • Cut out sloth with scissors and adhere to card using foam pads
            • Stamp sentiment in black ink

            Please check in on our fantastic Design Team for more countdown teasers:

            Thank you very much for joining us today.

             

            Clearly Besotted Supplies

            Other Supplies

            • Neenah Solar White 110lb card stock
            • Spellbinders Nestabilities circle dies
            • Spellbinders Nestabilities rectangle dies
            • My Favorite Things Snowdrift dies
            • Memento Tuxedo Black ink pad
            • VersaFine Onyx Black ink pad
            • VersaMark ink pad
            • Simon Says Stamp white pigment ink
            • Versacolor Ink pads
            • Ranger Distress Spray Stain Picket Fence
            • Copic Sketch markers
            • Uni-ball Signo white gel pen
            • White embossing powder
            • Mylar sheet 190 micron
            • Inkadinkado Stamping Mask Paper
            • Ranger mini ink blending tool
            • Heat tool
            • MISTI stamping platform

             

            October Release Countdown Teasers Day 2: Christmas Plushies & Holiday Huskies

            28 September, 2020 6 comments Leave a comment

            Welcome back to day 2 of the October Release Countdown Teasers.

            Today we're introducing three stamp sets called Christmas Plushies, Seasonal Scenes and Holiday Huskies.

              I Can Get You On The Naughty List

              Instructions

              • A6 white card base (4" x 5.5" approx.) portrait
              • Stamp backdrop scene in black ink on to 10 cm x 14 cm white card and mask
              • Ink blend background using mini ink blending tool with yellow and blue inks
              • Remove mask, colour scene with markers and add white highlight detail with gel pen
              • Adhere to card base using foam sheet cut to size and adhesive roller
              • Stamp penguin and reindeer in black ink on to separate white card, colour with markers and add white highlight detail with gel pen
              • Cut out penguin and reindeer with scissors and adhere to card using foam pads
              • Stamp sentiment in black ink

               

              Merry Christmas

              Instructions

              • A6 white card base (4" x 5.5" approx.) portrait
              • Die cut large circle aperture from mylar sheet to create reusable stencil
              • Position custom made stencil centrally on top of 10 cm x 14 cm white card and secure in place with washi tape
              • Mask across the bottom of the circle stencil using washi tape
              • Ink blend background using mini ink blending tool with two shades of blue ink
              • Allow to dry thoroughly before stamping New York skyline on top using watermark ink, sprinkle over white embossing powder and set with heat tool 
              • Remove stencil and adhere to card base using foam sheet cut to size and adhesive roller
              • Stamp bear in black ink on to separate white card, colour with markers and add white highlight detail with gel pen
              • Cut out bear with scissors and adhere to card using foam pads
              • Stamp speech bubble and sentiment in black ink on to separate white card, cut out with scissors and adhere to card with foam pads

                 

                Walkies In A Winter Wonderland

                Instructions

                • DL white card base (4" x 8.5" approx.) landscape
                • Ink blend background on to 10 cm x 20 cm white card using mini ink blending tool with two shades of blue ink and add starry sky detail using white ink spray
                • Adhere to card base using foam sheet cut to size and adhesive roller
                • Die cut snowdrifts from white card and adhere to card using foam pads
                • Stamp huskies, igloo and trees in black ink on to separate white card, colour with markers and add white highlight detail with gel pen
                • Cut out huskies, igloo and trees with scissors and adhere to card using foam pads
                • Stamp speech bubble and sentiment in black ink on to separate white card, cut out with scissors and adhere to card with foam pads
                • Stamp sentiment in black ink

                 

                Let It Snow Let It Snow Let It Snow

                Instructions

                • A6 white card base (4" x 5.5" approx.) portrait
                • Stamp Christmas scene in black ink on to 10 cm x 14 cm white card and colour with markers, then add white highlight detail with gel pen
                • Adhere to card base using foam sheet cut to size and adhesive roller
                • Stamp huskies in black ink on to separate white card and colour with markers
                • Cut out huskies with scissors and adhere to card using foam pads
                • Stamp sentiment in black ink

                Please check in on our fantastic Design Team for more countdown teasers:

                Thank you very much for joining us today.

                 

                Clearly Besotted Supplies

                Other Supplies

                • Neenah Solar White 110lb card stock
                • Spellbinders Nestabilities circle dies
                • My Favorite Things Snowdrift dies
                • Memento Tuxedo Black ink pad
                • VersaFine Onyx Black ink pad
                • VersaMark ink pad
                • Versacolor Ink pads
                • Ranger Distress Spray Stain Picket Fence
                • Copic Sketch markers
                • Uni-ball Signo white gel pen
                • White embossing powder
                • Mylar sheet 190 micron
                • Inkadinkado stamping mask paper
                • Ranger mini ink blending tool
                • Heat tool
                • MISTI stamping platform

                 

                October Release Countdown Teasers Day 1: Baa Humbug

                27 September, 2020 5 comments Leave a comment

                The October release countdown teasers start today and we are delighted to have the fabulous Francine Vuillème joining us again.  Francine was such an amazing September Guest Designer, we begged her to stay a little longer!

                Also joining us this month is the incredible Caly Person and we couldn't be more excited!  Caly is unbelievably talented, her creativity leaves us speechless and we can't wait for you to be inspired by her amazing creations.  We are beyond thrilled to have her on board this month.

                 

                There are eight new stamp sets coming on the 1st of October and today we're introducing a stamp set called Baa Humbug.

                  It's Beginning To Cost A Lot Like Christmas

                   

                  Instructions

                  • DL white card base (4" x 8.5" approx.) landscape
                  • Mask off a border using washi tape on 10 cm x 20 cm white card
                  • Ink blend background using mini ink blending tool with two shades of blue ink and add starry sky detail using white ink spray
                  • Allow to dry thoroughly before stamping sentiment on top with watermark ink, sprinkle over white embossing powder and set with heat tool
                  • Remove washi tape and adhere to card base using foam sheet cut to size and adhesive roller
                  • Die cut snowdrifts from white card and adhere to card using foam pads
                  • Stamp sheep and tree in black ink on to separate white card, colour with markers and add white highlight detail with gel pen
                  • Cut out sheep and tree with scissors and adhere to card using foam pads
                  • Stamp speech bubble and sentiment in black ink on to separate white card, cut out with scissors and adhere to card with foam pads

                   

                  It's Beginning To Cost A Lot Like Christmas

                   

                  Instructions

                  • A6 white card base (4" x 5.5" approx.) portrait
                  • Stamp Christmas scene in black ink on to 10 cm x 14 cm white card and mask
                  • Ink blend background using mini ink blending tool with blue ink
                  • Remove mask, colour scene with markers and add white highlight detail with gel pen
                  • Adhere to card base using foam sheet cut to size and adhesive roller
                  • Stamp sheep in black ink on to separate white card, colour with markers and add white highlight detail with gel pen
                  • Cut out sheep with scissors and adhere to card using foam pads
                  • Die cut speech bubble from white card, stamp sentiment in black ink and adhere to card with foam pads

                     

                    Put Me On The Naughty List

                     

                    Instructions

                    • A6 white card base (4" x 5.5" approx.) portrait
                    • Die cut large rectangle aperture from mylar sheet to create reusable stencil
                    • Position custom made stencil centrally on top of 10 cm x 14 cm white card and secure in place with washi tape
                    • Ink blend background using mini ink blending tool with two shades of blue ink and add starry sky detail using white ink spray
                    • Adhere to card base using foam sheet cut to size and adhesive roller
                    • Die cut snowdrift from white card and adhere to card using foam pads
                    • Stamp sheep in black ink on to separate white card, colour with markers and add white highlight detail with gel pen
                    • Cut out sheep with scissors and adhere to card using foam pads
                    • Stamp speech bubbles and sentiments in black ink on to separate white card, cut out with scissors and adhere to card with foam pads
                    • Stamp sentiment in black ink

                    Please check in on our fantastic Design Team for more countdown teasers:

                    Thank you very much for joining us today.

                     

                    Clearly Besotted Supplies

                    Other Supplies

                    • Neenah Solar White 110lb card stock
                    • Spellbinders Nestabilities rectangle dies
                    • My Favorite Things Snow Drifts dies
                    • Memento Tuxedo Black ink pad
                    • VersaFine Onyx Black ink pad
                    • VersaMark ink pad
                    • Versacolor Ink pads
                    • Ranger Distress Spray Stain Picket Fence
                    • Copic Sketch markers
                    • Uni-ball Signo white gel pen
                    • White embossing powder
                    • Mylar sheet 190 micron
                    • Inkadinkado stamping mask paper
                    • Ranger mini ink blending tool
                    • Heat tool
                    • MISTI stamping platform

                     

                    September Release Countdown Teasers Day 5: New Products

                    01 September, 2020 3 comments Leave a comment

                    We are very excited to show you all of the new products that will be available in our store, and also at Simon Says Stamp tonight at 8pm (BST) UK time. 

                    We regret to inform you that there will be no coordinating dies for this months release, we have decided to put a hold on them for a while but will keep you updated should this change.  Sincere apologies for any disappointment or frustration this may cause.

                    September New Product Release

                    New Products

                      The fabulous Design Team all have one last teaser to share with you today:

                      And superstar Michelle has once again kindly produced a product reveal video for this months release.  We must of course say a huge thank you to the amazing Francine for guest designing this month.  It has been delightful having her showcase our stamps so wonderfully, what a shame we don't get to keep her!

                      As always, for a chance to win all of this month's new stamp sets, please head on over to our facebook page and leave a comment on today's post.

                      Hope you are all well, thank you for your company throughout the countdown teasers and please continue to look after yourselves.

                       

                      September Release Countdown Teasers Day 4: Treats Please

                      31 August, 2020 4 comments Leave a comment

                      Welcome back to day 4 of the September Release Countdown Teasers.

                      Today we're introducing a stamp set called Treats Please.

                        Always Listen To Your Mummy

                        Instructions

                        • A6 white card base (4" x 5.5" approx.) portrait
                        • Stamp door backdrop in black ink on to 10 cm x 14 cm white card and mask
                        • Ink blend background using mini ink blending tool with orange and black inks
                        • Remove mask, colour image with markers and add white highlight detail with gel pen
                        • Stamp sentiment with watermark ink, sprinkle over white embossing powder, remove excess, and set with heat tool
                        • Adhere to card base using foam sheet cut to size and adhesive roller
                        • Stamp characters in black ink on to separate white card, colour with markers and add white highlight detail with gel pen
                        • Cut out characters with scissors and adhere to card using foam pads
                        • Stamp speech bubbles and sentiments in black ink on to separate white card, cut out with scissors and adhere to card with foam pads

                           

                          Happy Halloween

                          Instructions

                          • A6 white card base (4" x 5.5" approx.) landscape
                          • Die cut large oval aperture from mylar sheet to create reusable stencil
                          • Position custom made stencil centrally on top of 10 cm x 14 cm white card, landscape orientation, and secure in place with washi tape
                          • Mask off 3 cm from the bottom of white card (straight across the bottom of the oval stencil) using washi tape
                          • Ink blend background using mini ink blending tool with blue, indigo and cerise inks
                          • Add starry sky detail using white ink spray and stamp background image in black ink
                          • Remove stencil and adhere to card base using foam sheet cut to size and adhesive roller
                          • Stamp characters, balloons and accessories in black ink on to separate white card, colour with markers and add white highlight detail with gel pen
                          • Cut out characters, balloons and accessories with scissors and adhere to card using foam pads
                          • Stamp speech bubbles and sentiments in black ink on to separate white card, cut out with scissors and adhere to card with foam pads
                          • Stamp sentiment in black ink

                           

                          Happy Halloween

                          Instructions

                          • A6 white card base (4" x 5.5" approx.) portrait
                          • Ink blend background on to 10 cm x 14 cm white card using stencil, mini ink blending tool and three shades of orange ink
                          • Attach to card base using foam sheet cut to size and adhesive roller
                          • Stamp door backdrop and characters in black ink on to separate white card, colour with markers and add white highlight detail with gel pen
                          • Cut out door backdrop and characters with scissors and adhere to card using foam pads
                          • Stamp sentiment in black ink

                          Please check in on our fantastic Design Team for more countdown teasers:

                          Thank you very much for joining us today.

                           

                          Clearly Besotted Supplies

                          Other Supplies

                          • Neenah Solar White 110lb card stock
                          • Spellbinders Nestabilities oval dies
                          • Memento Tuxedo Black ink pad
                          • VersaFine Onyx Black ink pad
                          • VersaMark ink pad
                          • Versacolor Ink pads
                          • Copic Sketch markers
                          • Uni-ball Signo white gel pen
                          • Ranger Distress Spray Stain Picket Fence
                          • White embossing powder
                          • Ranger mini ink blending tool
                          • Heat tool
                          • MISTI stamping platform

                           

                          September Release Countdown Teasers Day 3: Fall Fun & Ring Around Autumn

                          30 August, 2020 6 comments Leave a comment

                          Welcome back to day 3 of the September Release Countdown Teasers.

                          Today we're introducing two stamp sets called Fall Fun and Ring Around Autumn.

                            Autumn Leaves & Pumpkins Please

                            Instructions

                            • A6 white card base (4" x 5.5" approx.) portrait
                            • Die cut large rectangle aperture from mylar sheet to create reusable stencil
                            • Position custom made stencil centrally on top of 10 cm x 14 cm white card and secure in place with washi tape
                            • Ink blend background using mini ink blending tool with three shades of blue ink, the notebook and torn edge detail is achieved using the Tear Away stencil
                            • Remove all stencils and adhere to card base using foam sheet cut to size and adhesive roller
                            • Stamp hippos and leaf pile in black ink on to separate white card, colour with markers and add white highlight detail with gel pen
                            • Cut out hippos and leaf pile with scissors and adhere to card using foam pads
                            • Stamp sentiment in black ink

                             

                            Enjoy Yourself

                            Instructions

                            • DL white card base (4" x 8.5" approx.) landscape
                            • Mask off a border using washi tape on 10 cm x 20 cm white card
                            • Ink blend background using mini ink blending tool with blue, indigo and cerise inks
                            • Add starry sky detail using white ink spray, then stamp background image in black ink
                            • Remove washi tape and adhere to card base using foam sheet cut to size and adhesive roller
                            • Stamp hippos in black ink on to separate white card, colour with markers and add white highlight detail with gel pen
                            • Cut out hippos with scissors and adhere to card using foam pads
                            • Stamp speech bubbles and sentiments in black ink on to separate white card, cut out with scissors and adhere to card using foam pads

                               

                              Sending Love

                              Instructions

                              • A6 white card base (4" x 5.5" approx.) portrait
                              • Create background on to 10 cm x 14 cm kraft card using stencil and craft squeegee with white embossing paste
                              • Allow to dry thoroughly, then adhere to card base using foam sheet cut to size and adhesive roller
                              • Stamp wreath and squirrel in black ink on to separate white card, colour with markers and add white highlight detail with gel pen
                              • Cut out wreath and squirrel with scissors and adhere to card using foam pads
                              • Stamp sentiment strip in black ink on to separate white card, cut out with scissors and adhere to card using foam pads

                               

                              Sincerest Thanks

                              Instructions

                              • 10.5 cm square white card base (4" x 4" approx.)
                              • Cover card base with 10.5 cm x 10.5 cm pattern paper
                              • Tie natural twine along the bottom of 10.5 cm x 9 cm white card, then adhere to card base using foam sheet cut to size and adhesive runner
                              • Stamp wreath in watermark ink on to separate white card, sprinkle over white embossing powder, remove excess, then set and emboss with heat tool
                              • Colour wreath with watercolor medium, cut out with scissors and adhere to card using foam pads
                              • Stamp hamster in black ink on to separate white card, colour with markers and add white highlight detail with gel pen
                              • Cut out hamster with scissors and adhere to card using foam pads
                              • Stamp sentiment strip in black ink on to separate white card, cut out with scissors and adhere to card using foam pads

                              Please check in on our fantastic Design Team for more countdown teasers:

                              Thank you very much for joining us today.

                               

                              Clearly Besotted Supplies

                              Other Supplies

                              • Neenah Solar White 110lb card stock
                              • Echo Park pattern paper pad
                              • Memento Tuxedo Black ink pad
                              • VersaFine Onyx Black ink pad
                              • VersaMark ink pad
                              • Versacolor Ink pads
                              • Ranger Distress Spray Stain Picket Fence
                              • Copic Sketch markers
                              • Zig Clean Color Real Brush pens
                              • Uni-ball Signo white gel pen
                              • Dream Weaver embossing paste
                              • Ranger Craft Squeegee
                              • White embossing powder
                              • Ranger mini ink blending tool
                              • Heat tool
                              • Natural twine
                              • MISTI stamping platform

                               

                              September Release Countdown Teasers Day 2: Creepy Corners & Happy Campers

                              29 August, 2020 5 comments Leave a comment

                              Welcome back to day 2 of the September Release Countdown Teasers.

                              Today we're introducing two stamp sets called Creepy Corners and Happy Campers.

                                Sorry To Hear You're Feeling Frightful

                                Instructions

                                • A6 white card base (4" x 5.5" approx.) portrait
                                • Die cut large rectangle aperture from mylar sheet to create reusable stencil
                                • Position custom made stencil centrally on top of 10 cm x 14 cm white card and secure in place with washi tape
                                • Ink blend background using mini ink blending tool with blue, green and yellow inks, the slime detail is achieved using the Splat It stencil
                                • Allow to dry thoroughly before removing all stencils and stamping sentiment on top with watermark ink, sprinkle over white embossing powder and set with heat tool
                                • Adhere to card base using foam sheet cut to size and adhesive roller
                                • Stamp pumpkin corner image and spider in black ink on to separate white card, colour with markers and add white highlight detail with gel pen
                                • Cut out pumpkin corner image and spider with scissors and adhere to card using foam pads

                                 

                                Have A Spooktacular Fright Night

                                Instructions

                                • A6 white card base (4" x 5.5" approx.) portrait
                                • Stamp birch trees on to 9 cm x 12 cm dark blue card in watermark ink, sprinkle over silver embossing powder and set with heat tool
                                • Adhere to card base using adhesive roller
                                • Die cut large circle aperture from 10 cm x 14 cm white card and adhere to card base using foam sheet cut to size and adhesive roller
                                • Stamp pumpkin corner image and bat in black ink on to separate white card, colour with markers and add white highlight detail with gel pen
                                • Cut out pumpkin corner image and bat with scissors and adhere to card using foam pads
                                • Stamp sentiment in black ink

                                   

                                  Let's Go Wild On Your Birthday

                                  Instructions

                                  • A6 white card base (4" x 5.5" approx.) portrait
                                  • Stamp bear campsite image in black ink on to 10 cm x 14 cm white card and mask
                                  • Ink blend background using mini ink blending tool with blue, purple and cerise inks
                                  • Add starry sky and moon detail manually with white gel pen
                                  • Remove mask and colour image with markers, add white highlight detail with gel pen
                                  • Adhere to card base using foam sheet cut to size and adhesive roller
                                  • Stamp sentiment in black ink

                                   

                                  I'm Always Here For You If You Need Me

                                  Instructions

                                  • A6 white card base (4" x 5.5" approx.) portrait
                                  • Die cut large circle aperture from mylar sheet to create reusable stencil
                                  • Position custom made stencil centrally on top of 10 cm x 14 cm white card and secure in place with washi tape
                                  • Ink blend background using mini ink blending tool with yellow, orange and red inks
                                  • Add sunset detail using stencil with mini ink blending tool and white pigment ink
                                  • Stamp squirrel image in black ink on to separate white card, colour with markers and add white highlight detail with gel pen
                                  • Cut out squirrel image with scissors and adhere to card using foam pads
                                  • Stamp speech bubble and sentiment in black ink on to separate white card, cut out with scissors and adhere to card with foam pads
                                  • Stamp sentiment in black ink

                                  Please check in on our fantastic Design Team for more countdown teasers:

                                  Thank you very much for joining us today.

                                   

                                  Clearly Besotted Supplies

                                  Other Supplies

                                  • Neenah Solar White 110lb card stock
                                  • Papertrey Ink Enchanted Evening cardstock 
                                  • Spellbinders Nestabilities circle dies
                                  • Memento Tuxedo Black ink pad
                                  • VersaFine Onyx Black ink pad
                                  • VersaMark ink pad
                                  • Simon Says Stamp white pigment ink
                                  • Versacolor Ink pads
                                  • Ranger Distress Spray Stain Picket Fence
                                  • Copic Sketch markers
                                  • Uni-ball Signo white gel pen
                                  • White embossing powder
                                  • Silver embossing powder
                                  • Mylar sheet 190 micron
                                  • Inkadinkado stamping mask paper
                                  • Ranger mini ink blending tool
                                  • Heat tool
                                  • MISTI stamping platform

                                   

                                  September Release Countdown Teasers Day 1: Balloon Bunch Halloween

                                  28 August, 2020 5 comments Leave a comment

                                  The countdown teasers kick off today and we would like to start by introducing our Guest Designer for September.

                                  We are super duper excited and over the moon to be welcoming Francine Vuillème as guest designer for this month.  Francine is an incredible talent and we have been a big fan of hers for quite sometime now!  We feel very privileged to have her join us for the September countdown teasers.

                                  There are six new stamp sets coming on the 1st of September and today we're introducing a stamp set called Balloon Bunch Halloween.

                                    Happy Halloween

                                    Instructions

                                    • DL white card base (4" x 8.5" approx.) portrait
                                    • Mask off a border using washi tape on 10 cm x 20 cm white card
                                    • Ink blend background using mini ink blending tool with three shades of blue inks
                                    • Add starry sky detail using white ink spray, then add haunted house and bat silhouettes using stencil with mini ink blending tool and black ink
                                    • Remove washi tape and adhere to card base using foam sheet cut to size and adhesive roller
                                    • Stamp balloons and witches in black ink on to separate white card, colour with markers and add white highlight detail with gel pen
                                    • Cut out balloons and witches with scissors and adhere to card using foam pads
                                    • Stamp speech bubbles and sentiments in black ink on to separate white card, cut out with scissors and adhere to card with foam pads

                                     

                                    Witching You Nothing But Treats

                                    Instructions

                                    • A6 white card base (4" x 5.5" approx.) portrait
                                    • Die cut large rectangle aperture from mylar sheet to create reusable stencil
                                    • Position custom made stencil centrally on top of 10 cm x 14 cm white card and secure in place with washi tape
                                    • Ink blend background using mini ink blending tool with blue, green and yellow inks
                                    • Add starry sky detail using white ink spray and add building silhouettes using stencil and mini ink blending tool with black ink, then remove stencil
                                    • Allow to dry thoroughly before stamping sentiment on top with watermark ink, sprinkle over white embossing powder and set with heat tool
                                    • Adhere to card base using foam sheet cut to size and adhesive roller
                                    • Stamp balloons and witches in black ink on to separate white card, colour with markers and add white highlight detail with gel pen
                                    • Cut out balloons and witches with scissors and adhere to card using foam pads

                                       

                                      Park Your Broom & Sit For A Spell

                                      Instructions

                                      • A6 white card base (4" x 5.5" approx.) portrait
                                      • Die cut large rectangle aperture from mylar sheet to create reusable stencil
                                      • Position custom made stencil centrally on top of 10 cm x 14 cm white card and secure in place with washi tape
                                      • Stamp nighttime backdrop in black ink and mask
                                      • Ink blend background using mini ink blending tool with blue and cerise inks
                                      • Add starry sky detail using white ink spray, then remove all masks and colour images with markers
                                      • Allow to dry thoroughly before stamping sentiment on top with watermark ink, sprinkle over white embossing powder and set with heat tool
                                      • Adhere to card base using foam sheet cut to size and adhesive roller
                                      • Stamp balloon and witches in black ink on to separate white card, colour with markers and add white highlight detail with gel pen
                                      • Cut out balloon and witches with scissors and adhere to card using foam pads

                                      Please check in on our fantastic Design Team for more countdown teasers:

                                      Thank you very much for joining us today, hope you are well.

                                       

                                      Clearly Besotted Supplies

                                      Other Supplies

                                      • Neenah Solar White 110lb card stock
                                      • Spellbinders Nestabilities rectangle dies
                                      • Memento Tuxedo Black ink pad
                                      • VersaFine Onyx Black ink pad
                                      • VersaMark ink pad
                                      • Versacolor Ink pads
                                      • Ranger Distress Spray Stain Picket Fence
                                      • Copic Sketch markers
                                      • Uni-ball Signo white gel pen
                                      • White embossing powder
                                      • Mylar sheet 190 micron
                                      • Inkadinkado stamping mask paper
                                      • Ranger mini ink blending tool
                                      • Heat tool
                                      • MISTI stamping platform

                                       

                                      1 2 3 22 Next »