Latest News

Articles tagged as Picture It Halloween (view all)

September Release Countdown Teasers Day 3: Hippo Halloween

30 August, 2019 7 comments Leave a comment

Welcome back to day 3 of the September Release Countdown Teasers.

Today we're introducing a stamp set called Hippo Halloween.

Have A Fiendishly Fun-Filled Birthday

Instructions

  • A6 white card base (4" x 5.5" approx.) portrait
  • Stamp hippos in black ink on to 10 cm x 14 cm white card, masking each image prior to stamping the next until all images are masked
  • Die cut a circle aperture from mylar sheet (or preferred medium) and place over the image, securing in place with washi tape
  • Create background using ink blending technique, as shown in this video
  • Remove all masks, colour image with markers and add white highlight detail with gel pen
  • Stamp sentiment in black ink

 

Park Your Broom & Sit For A Spell

Instructions

  • A6 white card base (4" x 5.5" approx.) portrait
  • Die cut circle from masking paper and adhere to lower part of 10 cm x 14 cm white card
  • Create background using ink blending technique with shades of blue ink
  • Add starry sky effect with white ink spray and gel pen, remove mask and colour moon with markers, then adhere to card base using foam sheet cut to size
  • Stamp cityscape in black ink on to separate white card and colour the windows with markers
  • Cut out cityscape using scissors and adhere to card using foam sheet cut to size
  • Stamp hippo in black ink on to separate white card, colour with markers and add white highlight detail with gel pen
  • Cut out hippo using scissors and adhere to card using foam pads
  • Stamp sentiment with black ink

 

Trick or Treat / Best Witches

Instructions

  • Die cut tags from black and orange card, then die cut decorative edge along the bottom of the orange tag
  • Stamp stripey pattern on to the orange tag with white pigment ink
  • Adhere the orange tag on top of the black tag using foam sheet cut to size
  • Die cut small circle from green card, stamp spotty pattern on to circle with white pigment ink and adhere to tag using foam pads
  • Die cut sentiment strip from purple card, stamp sentiment on to it with black ink and adhere to tag using foam pads
  • Stamp hippo and accessories with black ink on to separate white card, colour with markers and add white highlight detail with gel pen
  • Cut out hippo and accessories with scissors and adhere to tag using foam pads
  • Die cut hole reinforcement from black card and adhere to tag using glue pen
  • Attach black twine and tie in a bow

 

Happy Halloween Have A Spooktacular Day

Instructions

  • A6 white card base (4" x 5.5" approx.) portrait
  • Stamp Halloween background on to 10 cm x 14 cm white card and mask it off
  • Create background using ink blending technique with shades of blue ink and add starry sky effect with white ink spray and gel pen
  • Remove mask and colour image with markers, add white highlight detail with gel pen, then adhere to card base using foam sheet cut to size
  • Stamp sentiment with watermark ink, sprinkle over white embossing powder, then set and emboss with heat tool
  • Stamp hippos in black ink on to separate white card, colour with markers and add white highlight detail with gel pen
  • Cut out hippos using scissors and adhere to card using foam pads

 

Please check in on our fantastic Design Team for more countdown teasers today:

Thank you for looking and happy stamping!

 

Clearly Besotted Supplies

Other Supplies

  • Neenah Solar White 110lb card stock
  • Papertrey Ink True Black. Orange Zest, Green Parakeet and Winter Wisteria card stock
  • Spellbinders Nestabilities circle dies
  • Memento Tuxedo Black ink pad
  • VersaFine Onyx Black ink pad
  • Simon Says Stamp white pigment ink pad
  • VersaColor ink pads
  • Versamark pad
  • Ranger Distress Spray Stain Picket Fence
  • Copic Sketch markers
  • Uni-ball Signo white gel pen
  • White embossing powder
  • Inkadinkado stamping mask paper
  • Ranger mini ink blending tool
  • MISTI stamping platform
  • Sakura Quickie glue pen
  • Black twine

 

September Release Countdown Teasers Day 1: Halloween Plushies & Picture It Halloween

28 August, 2019 9 comments Leave a comment

The countdown teasers for September start today with six new stamp sets coming on the 1st of September.

We are unbelievably lucky to have the incredible Joy Taylor guest designing this month.  Joy is currently on the Design Team of My Favorite Things, a leading brand in the industry and we have been admiring her fabulous creations on instagram for quite a while now.  We are extremely excited to have her on board for our September and October releases!  Joy has made some amazing cards and we can't wait for you to see them.

"I am Joy and I live in Australia, in a small country town with my partner Darryl, we live in a small cottage.  I have loved to craft for as long as I can remember.  I have been on many design teams and have guested for many more, always honoured and humbled when asked.  I have met so many people around the world through this craft and many have become close friends, this craft is something that keeps my life sane and smiles everyday!"

 

Today we're introducing two stamp sets called Halloween Plushies and Picture It Halloween.

Trick or Treat Have A Spooktacular Halloween

Instructions

  • A6 white card base (4" x 5.5" approx.) portrait
  • Stamp vampire, witch and mummy plushies in black ink on to 10 cm x 14 cm white card, masking each image prior to stamping the next until all images are masked, then stamp Halloween backdrop, mask this too
  • Create background using ink blending technique with indigo and orange ink, add starry sky effect with white spray and gel pen
  • Remove all masks, colour images with markers and add white highlight detail with gel pen
  • Stamp sentiment with watermark ink, sprinkle over white embossing powder, then set and emboss with heat tool
  • Attach to card base using foam sheet cut to size

 

Have A Spooky Halloween

Instructions

  • A6 white card base (4" x 5.5" approx.) portrait
  • Cut 1 cm x 12 cm strips of green, purple and orange card, adhere strips to card base using adhesive roller
  • Die cut circle from 10 cm x 14 cm white card and adhere to card base using foam sheet cut to size
  • Stamp skeleton, witch and mummy plushies in black ink on to separate white card, colour with markers and add white highlight detail with gel pen
  • Cut out skeleton, witch and mummy plushies using scissors and adhere to card using foam pads
  • Stamp speech bubble and sentiment in black ink on to separate white card, cut out with scissors and adhere to card using foam pads
  • Stamp sentiment with watermark ink on to thin strip of black card, sprinkle over white embossing powder, then set and emboss with heat tool
  • Adhere sentiment to card using foam pads

 

A Little Naughty But Very Nice

Instructions

  • A6 white card base (4" x 5.5" approx.) portrait
  • Stamp mummy, devil and skeleton plushies in black ink on to 10 cm x 14 cm white card, masking each image prior to stamping the next until all images are masked, then stamp shelf and mask this too
  • Die cut a circle aperture from mylar sheet (or your preferred medium) and place over the image, adhering in place with washi tape
  • Create background using ink blending technique with purple ink, then add web detail using stencil, blending tool and white pigment ink
  • Remove all masks, colour image with markers and add white highlight detail with gel pen
  • Stamp sentiment with black ink

 

To My Handsome Devil

Instructions

  • A6 white card base (4" x 5.5" approx.) portrait
  • Cut 2 cm x 8.5 cm strip of green card and 2 cm x 9.5 cm of orange card, stamp pattern on to each of them using white pigment ink
  • Stamp sentiment in black ink on to the strip of green card
  • Adhere orange strip to 10 cm x 14 cm white card using adhesive roller and adhere the green strip on top using foam pads, then attach to card base using foam sheet cut to size
  • Stamp mummy, devil, skeleton and accessories in black ink on to separate white card, colour with markers and add white highlight detail with gel pen
  • Cut out mummy, devil, skeleton and accessories using scissors and adhere to card using foam pads
  • Stamp speech bubble and sentiment in black ink on to separate white card, cut out with scissors and adhere to card using foam pads

 

    Please check in on our fantastic Design Team for more countdown teasers today:

    Thank you for looking and happy stamping!

     

    Clearly Besotted Supplies

    Other Supplies

    • Neenah Solar White 110lb card stock
    • Papertrey Ink Orange Zest, Green Parakeet and Winter Wisteria card stock
    • Memento Tuxedo Black ink pad
    • VersaFine Onyx Black ink pad
    • Simon Says Stamp white pigment ink pad
    • VersaColor ink pads
    • Versamark pad
    • Copic Sketch markers
    • Faber-Castell Polychromos pencils
    • Uni-ball Signo white gel pen
    • White embossing powder
    • Inkadinkado stamping mask paper
    • Mylar sheet 190 micron
    • Ranger Distress Spray Stain Picket Fence
    • Ranger mini ink blending tool
    • MISTI stamping platform
    • WOW! heat gun